### June 3, 2016

# FLO Cycling - How Much Time Will FLO Wheels Save Me?

The benefit of aero race wheels is that they reduce your overall drag and make you faster. In 2012, I wrote a blog article that discussed how much time you'd save by reducing your drag while traveling at speeds between 1-30mph. In that article I discussed how there is a common misconception that you have to be traveling at a certain speed for race wheels to be of any benefit. The truth is, that is false. In reality, the slower you go, the more time you save over a distance. That's right, if you were to ride 40km at 30mph you would save less time then if you were to ride 40km at 20mph. While counterintuitive, the best explanation I can give is riding at slower speeds allows you to experience the benefits of reduced drag for a longer period of time since it takes you longer to complete the course.

Since I wrote the first article, we've released all of our new wheels and have updated our Net Drag Reduction Value formula based on our Data Collection Project. Today, I wanted to share all of the new time savings charts for each of our new wheels for relative velocities between 1-30mph.

**Before We Start**

Before we discuss the results, let's first discuss relative velocity, and the math behind the time savings calculated below.

**Relative Velocity**

Before we get into the math, there is an important concept you should understand. This is relative velocity. When calculating drag, your speed is not simply the speed at which you are traveling on your bike. Relative velocity is the combination of the speed at which you are traveling on your bike and the velocity of the wind. This combination of velocities are known as the relative velocity. If you are traveling 15mph into a 5mph head wind, your relative velocity would be 20mph. If you were traveling 15mph with a 5mph tail wind, your relative velocity would be 10mph. For a more detailed explanation on relative velocity, you will find this post helpful.

**The Math Behind the Numbers**

__FLO Carbon Clincher Wheels__

**FLO 45 Carbon Clincher - Time Savings between 1-30mph**

**FLO 60 Carbon Clincher - Time Savings between 1-30mph**

**FLO 90 Carbon Clincher - Time Savings between 1-30mph**

**FLO DISC Carbon Clincher - Time Savings between 1-30mph**

__FLO Aluminum + Carbon Wheels__**FLO 60 Aluminum + Carbon - Time Savings between 1-30mph**

**FLO 90 Aluminum + Carbon - Time Savings between 1-30mph**

**FLO DISC Aluminum + Carbon - Time Savings between 1-30mph**

__FLO Aluminum + Carbon Wheels__

**FLO 30 - Time Savings between 1-30mph**

I hope you enjoyed this article. If you have any questions or comments, please be sure to let me know.

Take care,

Jon

Subscribe to:
Post Comments
(
Atom
)

## 6 comments :

I see what you're getting at, but times saved as a percentage of total times seem to be similar/the same.

For example, for the FLO 45 CCs at 20mph, it's a 2.22% savings. It's also 2.22% for the FLO 45 CCs at 30mph.

Am I missing your point?

Gregory,

Since the Cd for each scenario stays the same, the drag reduction also stays the same. If you work out the time savings, the percentage will be the same as well.

Take care,

Jon

How can I calculate time savings, ways or grams of drag (either is fine) of 45 CC on a 6% grade HC climb vs stock box rim?

Robert,

I'd look into http://www.analyticcycling.com/. They have a number of calculation tools that should help you out.

Take care,

Jon

Is the time savings per wheel or wheelset ?

Thank you

roots-n-rocks,

The original article linked at the beginning of this article highlights all of the details/math behind the numbers. Here's an excerpt from that article.

The following shows the savings for each wheel. Remember if you have two wheels multiply the savings by two.I hope that helps,

Chris

Post a Comment